8 in. Twist Style Acrylic Back-To-Back Shower Door Pull Handle with Chrome Rings

CAT8X8 - 8 in. Bak-to-Bak Pull Acrylic Twist
  • Designed for 1/4 in. or 1/2 in. Glass
  • Through the glass mounting
  • 1/2 in. Hole Required
  • Three Year Warranty
  • Shower Door Acrylic Pulls help maintain an all glass look with their in.see-through in. appearance. Two sytles are offered: Smooth Style Acrylic Pull has a smooth, round surface; Twist Style Acrylic Pull has an intertwined in.rope in. appearance for a very unique and attractive look. Acrylic Pulls are formed of 3/4 inch (19.1 millimeter) diameter clear acrylic rod, and are secured with a choice of brass or chrome back-up washers. Each package consists of one pull for each side of the door.

Weight & Width*
2 Hinges (Max Door Width)
2 Hinges ( Max Door Weight)
3 Hinges (Max Door Width )
3 Hinges (Max Door Weight )


* NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.


CAT8X8 Cutout

Maintenance Guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation. If there is any squeaking that occurs after installation, put a drop of "3 in 1 Oil" (also known as "household oil") on the white nylon washer that the hinge body pivots on. This washer is the component that acts as a buffer, so the body of the hinge doesn't pivot directly on the brass center block. This solution doesn't require the disassembly of the hinge.
Note: Do not use spray lubricant on these hinges. If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism.

Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.