Vienna 045 Series Gold Plate Gls-to-Gls 135 degree Hinge

045 Vienna Hinge . . . ( 36 max )
  • Glass Thickness: 3/8 to 1/2 inch
  • Self-Centering -Swings: 90 in and 90 out
  • Solid Brass Construction
  • Safety Lock Cutout
  • Three Year Warranty
  • The Vienna Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

Weight & Width*
3/8" (10 mm ) Glass**
1/2" ( 12 mm ) Glass***
2 Hinges (Max Door Width)

36  in.

36  in.

2 Hinges ( Max Door Weight)

110  lbs.

100  lbs.

3 Hinges (Max Door Width )

36  in.

36  in.

3 Hinges (Max Door Weight )

140  lbs.

140  lbs.

* NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

** 3/8" glass weighs 4.78 lbs. per sq.ft.

*** 1/2" glass weighs 6.36 lbs. per sq.ft.

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.


VIE045 Cutout

Maintenance Guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation. If there is any squeaking that occurs after installation, put a drop of "3 in 1 Oil" (also known as "household oil") on the white nylon washer that the hinge body pivots on. This washer is the component that acts as a buffer, so the body of the hinge doesn't pivot directly on the brass center block. This solution doesn't require the disassembly of the hinge.
Note: Do not use spray lubricant on these hinges. If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism.

Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.