user:

Milano 90° Glass to Glass Chrome Hinge

MIL090
090 Milano Gls to Gls Hinge
  • Precise Closing Feature to Zero Degrees
  • Solid Brass Construction
  • For 1/4 in. or 5/16 in. Glass
  • Swings 90° in and 90° out
  • Three Year Warranty

    • The Milano Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The traditionally designed Milano Series of Hinges are constructed of solid brass material for reliable and durable performance. The closing action of the Milano allows the door precise closing to zero degrees. Two Wall Mount styles and three Glass-to-Glass style provide design flexibility. The Milano Series offers several elegant finishes from which to choose. Accommodates 1/4 to 5/16 inch (6 to 8 millimeter) thick glass.

Weight & Width*
1/4" ( 6 mm ) Glass**
5/16" ( 8 mm ) Glass***
2 Hinges (Max Door Width)

28  in.

28  in.
2 Hinges ( Max Door Weight)

60  lbs.

60  lbs.
3 Hinges (Max Door Width )

32  in.

32  in.
3 Hinges (Max Door Weight )

90  lbs.

90  lbs.

* NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

** 1/4" glass weighs 3.17 lbs. per sq.ft.

*** 5/16" glass weighs 4.20 lbs. per sq.ft.

Specifications:

MIL090 Dimensions

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.

 

MIL090 Cutout

Maintenance Guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation. If there is any squeaking that occurs after installation, put a drop of "3 in 1 Oil" (also known as "household oil") on the white nylon washer that the hinge body pivots on. This washer is the component that acts as a buffer, so the body of the hinge doesn't pivot directly on the brass center block. This solution doesn't require the disassembly of the hinge.
Note: Do not use spray lubricant on these hinges. If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism.

• Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.