Fabrication Options
 
Fabrication Options
user:
 
 
Erratic Edge

This unique fabrication technique can change what would a somewhat plain shower door enclosure into an impressive dramatic shower enclosure. The erratic edge is free-hand cut so every unit is different. We normally specify the height of the glass at the walls and let the cutter vary plus or minis 3 inches. Special effects can be achieved by changing the height of the glass at different edges. The Style 5 unit shown at the left starts high on the and drops at the corner and rises again to meet the wall.

The glass square footage is calculated from the highest point. This custom edge work is priced a $ 5.50 per lineal inch.

Pricing: $ 6.50 /lineal inch
Clipped Corners
   
This simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. It is just enough to make a nice shower into a special shower. The standard diagonal length is two inches.
   
Pricing $ 48.75 / corner pair
Scalloped Corners
   
This simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. It is just enough to make a nice shower into a special shower. The standard radius length is two inches.
   
Pricing $ 55.25/ corner pair
Radius Corners
   
Another simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. The rounded corners soften the stiff rigid filling that comes from the straight edges and square corners on a standard door. It is just enough to make a nice shower into a special shower. The standard radius used is two inches.
 
Pricing $ 51.00 / corner pair
Eyebrow Arch Top
An easy way to make a dramatic change to a Style 1 or Style 2 shower door. A Standard Eyebrow arch has a rise of 3 in. per 24 in. This can be modified to match an existing arch. We can cut the arch from a template to match a doorway arch. On style 2 showers the arch can span both panels of glass .
 
$55.00 / panel
Dome Top
  The Dome top is usually used to match a doorway arch. Care need to taken make sure the door swing is not restricted by the arch.
 

The glass square footage is calculated from the highest point.

Dome Top - $ 58.00/panel
Bell Top
    The Bell Top in another way to make your shower installation something special. The bell crown area can be accented with a carved glass design to add another degree of elegance

Bell Top - $ 58.00/panel

Carved glass designs are individually priced based on complexity
Clock Face Arch Top
     
     
   
House Top
  The House Top gives a modern look to the shower unit. The typical pitch is 4" rise per 12" width. This can specified to create the effect desired.
 
House Top - $30.50 / panel
Concave Top
  This is a interesting switch, and can be quite a eye catcher. The standard is to have the curve start 3" in from the edge, and dip 3" in 24" width.
Concave Top - $56.00 / panel
"S" Curve Top
     
 
S-curve Top - $59.50 / panel
12" Radius Corner
  The 12" radius corner is a standard radius on bath screens. The edge work is not limited to bath screens, and can create shower door unit.
 
12" Radius - $45.50 / corner
24" Radius Corner
  The 24" radius corner , or Large Radius corner is usually used on bath screens, but can also used on shower doors.
   
24" Radius - $52.00 / radius
 
© 2004 2010 eShowerDoor.com All rights reserved.