user:

Senior Prima 01 Series Brushed Nickel Screws Top or Bottom Mount Hinge

SRPPH02
02 Senior Prima Gls-to-Gls Pivot Hinge
  • Top and Bottom Mount Design Allows More Glass Exposure
  • Hinge Swings: Full Rotation
  • Solid Brass Construction
  • The Senior Prima Series of professional hinges is able to accommodate 1/2 inch thick tempered safety glass. A variety of two styles, Top and Bottom Mount and Glass-to-Glass types, gives design flexibility.Advantages of the Senior and Junior Prima Hinges include the fact that they carry the majority of the weight on the bottom and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.The Glass-to-Glass Top Pivot Hinge is used for doors having fixed transoms. Placed vertically, either style can be used in movable transom installations. These Pivot Hinges are self-centering, with four springs for maximum retention strength.

Weight & Width*
1/2" ( 12 mm ) Glass**
1/2" ( 12 mm ) Glass***
2 Hinges (Max Door Width)

'  in.

  in.

2 Hinges ( Max Door Weight)

'  lbs.

  lbs.

3 Hinges (Max Door Width )

'  in.

  in.

3 Hinges (Max Door Weight )

'  lbs.

  lbs.

* NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

** 1/2" glass weighs 6.36 lbs. per sq.ft.

*** 1/2" glass weighs 6.36 lbs. per sq.ft.

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.

 

SRPPH02 Cutout

Maintenance Guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation. If there is any squeaking that occurs after installation, put a drop of "3 in 1 Oil" (also known as "household oil") on the white nylon washer that the hinge body pivots on. This washer is the component that acts as a buffer, so the body of the hinge doesn't pivot directly on the brass center block. This solution doesn't require the disassembly of the hinge.
Note: Do not use spray lubricant on these hinges. If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism.

Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.