user:

Grande 037 Series Brushed Nickel Wall Mount Standard Back Plate Hinge

GRA037
037 Grande Hinge . . . ( 31 max )
  • Can be Side Mounted at Top and Bottom
  • Solid Brass Construction
  • 3 Year Warranty
  • Designed for 5/16 to 3/8 Glass
  • The Grande Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande's strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.

Weight & Width*
5/16" ( 8 mm ) Glass**
3/8" ( 10 mm ) Glass***
2 Hinges (Max Door Width)

31  in.

31  in.

2 Hinges ( Max Door Weight)

90  lbs.

90  lbs.

3 Hinges (Max Door Width )

34  in.

34  in.

3 Hinges (Max Door Weight )

134  lbs.

134  lbs.

* NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

** 5/16" glass weighs 4.20 lbs. per sq.ft.

*** 3/8" glass weighs 4.78 lbs. per sq.ft.

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.

 

GRA037 Cutout

Maintenance Guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation. If there is any squeaking that occurs after installation, put a drop of "3 in 1 Oil" (also known as "household oil") on the white nylon washer that the hinge body pivots on. This washer is the component that acts as a buffer, so the body of the hinge doesn't pivot directly on the brass center block. This solution doesn't require the disassembly of the hinge.
Note: Do not use spray lubricant on these hinges. If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism.

Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer that drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water. Using a soft, non-abrasive cloth, clean the hardware. Rinse thoroughly with clean, warm water and dry.