SDK140 - Crescent Grip Bak-to-Bak knob

Clearance: 1 1/8 in.
Glass Sizes: 1/4" to 1/2" thick tempered safety glass
Construction: Solid Brass
Mounting: Through the glass - 1/2' hole required
Includes: plastic washers
Hole to Hole: N.A.

Glass Cutout:

The cutout for the hinge allows some adjustment in door position after installation. The positioning of the cutout is subjective, but tempering facilities have minimum distances from the end of the glass to the notch. It is important that the hinge is centered in the cutout for the initial installation to have maxium adjustiability.


Maintenance Guidelines:

Never use an abrasive cleaner on the hardware. Many of the components are coated with a clear lacquer that will be irreparably damaged if subjected to harsh, abrasive chemicals. Advise your customer to use "Repellant Wash" on hardware and door. Spray the hardware and glass and dry with a clean, soft towel on a regular basis. If mineral deposits build-up, mix a couple of drops of a mild liquid soap (such as Ivory or a similar product) into a cup of warm water or "Amaz" can be used to remove the water spots. Clean the hardware using a soft non-abrasive cloth. Then rinse thoroughly and dry with a soft towel.