Call us at (408)988-3753

Glass Fabrication Gallery

We are a glass fabrication organization. To make a Euro Frameless Shower Door, we start with the glass and cut it to the correct size. Drill the holes, notches, polish the edges, and then temper the glass to make it into safety glass. Since we have to cut the glass, it is relatively easy to cut the glass to the exact size required to fit your space. Out of square walls aren't a problem because we can cut the glass out of square to match the walls. This process allows us to the opportunity to customize the door making it into something special for your bathroom. Shown on this page are a few shapes which can be used.

Erratic Edge

This unique fabrication technique can change what would a somewhat plain shower door enclosure into an impressive dramatic shower enclosure. The erratic edge is free-hand cut so every unit is different. We normally specify the height of the glass at the walls and let the cutter vary plus or minis 3 inches.

$ 6.50 per lineal inch

Dome Top

The Dome top is usually used to match a doorway arch. Care need to taken make sure the door swing is not restricted by the arch.

$ 58.00/panel

Bell Top

The Bell Top in another way to make your shower installation something special. The bell crown area can be accented with a carved glass design to add another degree of elegance

$ 58.00/panel

House Top

The House Top gives a modern look to the shower unit. The typical pitch is 4" rise per 12" width. This can specified to create the effect desired.

Pricing $30.50 / panel

Picture 22

Eyebrow Arch Top

An easy way to make a dramatic change to a Style 1 or Style 2 shower door. A Standard Eyebrow arch has a rise of 3 in. per 24 in. This can be modified to match an existing arch. We can cut the arch from a template to match a doorway arch. On style 2 showers the arch can span both panels of glass .

$55.00 / panel

Clipped Corners

This simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. It is just enough to make a nice shower into a special shower. The standard diagonal length is two inches.

Pricing $ 48.75 / corner pair

Scalloped Corners

This simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. It is just enough to make a nice shower into a special shower. The standard radius length is two inches.

Pricing $ 55.25/ corner pair

Radius Corners

Another simple modification can make a dramatic difference in the overall look and feeling of your shower door installation. The rounded corners soften the stiff rigid filling that comes from the straight edges and square corners on a standard door. It is just enough to make a nice shower into a special shower. The standard radius used is two inches.

Pricing $ 51.00 / corner pair

Concave Top

This is a interesting switch, and can be quite a eye catcher. The standard is to have the curve start 3" in from the edge, and dip 3" in 24" width.

$56.00 / panel

"S" Curve Top

$59.50 / panel

12" Radius Corner

The 12" radius corner is a standard radius on bath screens. The edge work is not limited to bath screens, and can create shower door unit.

$45.50 / corner

24" Radius Corner

The 24" radius corner , or Large Radius corner is usually used on bath screens, but can also used on shower doors.

$52.00 / radius