- Gallery
- Shower Doors Style/layouts
- Screens
- Side Hinges (Std Duty 3/8-1/2)
- Side Hinges (Hvy Duty 3/8-1/2)
- Side Hinges (Lit Duty 1/4-5/16)
- Pivot Hinges
- BiFold Hinges
- Sliding Door Hardware
- Door Pulls
- Grab Bars
- Fixed Panel Hardware
- Transom Clamps
- Header Systems
- Door Seals
- Cleaning the Shower
- Maintenance
- Installation Help
Call us at (408)988-3753
Carved Glass Design ( Class A )
eShowerDoor uses a special program to put patterns on the shower door glass. We use a sand blasting process to put the designs on the glass. This means that the design a permanent. They will not peal or crack. On this page we show a few of our standard Class A designs. These design are of medium complexity, and have a solid matt frost. The designs can be run as a clear design on a solid frost background for maximum privacy or as a frosted design on clear glass.
Wide Stripe
Wide Stripe: Frosted wide stripe on a clear background The design starts with a trim stripe, one large stripe, and finishes with a trim strip. The design is centered on the door panel, and follows at the same height for all other panels in the shower unit.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 38.5 inches and is centered on the door. The design is positioned on the other panels so that they align with the door design.
Standard Stripe
Standard Stripes: Frosted graduated stripes on a clear background The stripes start small and get wider in the middle and then get small again. This is the standard privacy stripe pattern. This simple design adds a touch of class to the any bathroom. Carved glass design show the best when bronze or gray glass is used.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 38.5 inches and is centered on the door. The design is positioned on the other panels so that they align with the door design.
Venetian Stripes
Venetian Stripes: Frosted stripes all of the same size form a privacy band. This simple design provides privacy yet keeps the top and bottom of the shower visually open.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 32.5 inches and is centered on the door. The design is positioned on the other panels to align with the door design.
Border Stripe
Border Stripe: Frosted stripe bordering to glass. This simple design provides a light touch of customization.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The 3002 stripe width is 1/2 inch, and the 3003 stripe is 1 inch wide.
Wide Border Stripe
Wide Border Stripe: Frosted stripes all of the same size form a privacy band. This simple design provides privacy yet keeps the top and bottom of the shower visually open.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The 3004 stripe width is 1-1/2 inches, and 3005 is a 2 inch stripe.